Intergrated Pump Box (for RO-Systems 50 - 100 GPD)

Intergrated boosterPump Box (for RO-Systems 50 - 100 GPD)

The Integrated pump box to make it simpler to install a managed pump system on Reverse Osmosis systems and water filters for application when water pressure is low.

Far better than a standard Diaphragm pump which are known for burning out within a 12 month period

 

 

 

INSTALLATION & USE

Booster pump to be used with the Reverse Osmosis Filters.

The pump is needed if the incoming water pressure is low (less than 3 bar) or unstable.

The kit contains:

• Pump
• A hose for connecting 1/4 “, 2 m
• Water connections 1/4 “(2 pcs)
• Clip (6 pcs)

Key Features

sensors for automatic switching on and off of the pump saving water from 30 to 50%.

• Sensors for automatic switching on and off of the pump
• Saves from 30 to 50% water
• Suitable for filters from other manufacturers

 

Technical

Inlet pressure, bar: 2-4.5
Outlet pressure, bar: up to 7
The inlet water temperature, °С: +4…+ 30
Pump weight, kg: 3.5
Total dimensions of the container, W x S x G, mm: 110х110х330
External water connection; 1/4 “
Supply voltage, V: 230
Voltage converter (adapter) AC / DC, V: 230/24

Fitted to the pump box:-

1 No. Booster pump, this will pump in access of 100PSI

1 No. Low Pressure switch, used to protect the pump by stopping to pump running when water supply is turned off)

1  No. High pressure switch, when used with a Pressure Tank or Float Valve the pump will switched off.

1 No. Solenoid Valve, when any of the above switched stop the pump this stop water running through the system on mains only pressure.

1 No. Transformer External to pump box.