Loading... Please wait...
Need help? Call us on 01704 531556 Free UK delivery on all orders
Menu
  • Free UK Delivery on All Orders
  • 30 Day Hassle Free Returns
  • Expert Advice & Support

Doulton Ecofast Housing With Ultracarb and Full Installation Kit With Heavy Duty Tap

by

|SKU: W9330236KIT
£149.95Inc. VAT
Availability: Usually shipped within 24 Hours - UK mainland free delivery

Multi-Buy Discounts

  • Buy 2 - 99 and get 10% off

Product Description

EcoFast® quick release ceramic filter housing is ideal for both water cooler and domestic drinking water filter applications. This system comes with the famous Doulton Ultracarb Candle which will tackle dirt / sediment down to 0.9micron Absolute, as well as providing protection against bacteria and cysts.

The carbon cored ceramic filter candles also reduce chlorine to improve taste and odour as well as removing heavy metals in the drinking water.

  • Sterasyl ceramic outer shell - carbon block core.
  • Activated Carbon Block.
  • ATS resin for lead reduction.
  • Chlorine, cycts, bacteria, organics reduction filter.
  • Comes with Heavy Duty Ceramic Valve Tap.

Comes with a choice of cold mains fittings and a selection of 2 taps. If you are unsure which connection is best for you please call our experienced sales staff on 01704 531556 and we will be happy to advise.

The saddle valve option means that there is no hard plumbing involved in fitting to your mains water, you can fit it yourself.

EcoFast® Technical Specifications:
Connections: 1/4" push fit inlet and outlet suitable for connection to flexible plastic pipe.
Flow Rate: 275 litres / hour at 60 psi (4 bar) supply pressure.
Working Pressure Range: 0.7 bar (10 psi) - 6 bar (90 psi).
Working Temperature Range: Recommended range - 5 - 38°C (41-100°F).

View the Doulton Ecofast Datasheet

FILTER SPECIFICATION

Brand Doulton
Filter Type Ceramic/Carbon Block/Heavy Metal Reduction Media
Use Taste & Odour & Scale Protection/ Heavy Metal Removal
Flow Rate 3.7 lpm / 0.98 gpm (US Gallons)
Micron Rating 0.5 Nominal and 0.9 Absolute
Capacity 2300 Litres
Min Water Temp 5°C / 41°F
Min Working Pressure 0.7 bar / 10 psi
Max Working Pressure 8.75 Bar/125 PSI
Inlet/Outlet 1/4” Pushfit

 

Carriage is free of charge to UK mainland.

dw-andrews-water-treatment-2023-small.jpg

 

1/2/51/3

cards3.png

Product Videos

How To Install A Doulton® EcoFast® Water Filter | Doulton® Water Filters 02:51

Follow our guide to discover how to install a Doulton® EcoFast® water filter: Install the EcoFast® water filter housing: 1. Locate the filter in an upright position near to the incoming cold water supply and the user tap/faucet. 2. Ensure that the connecting pipework will not have any sharp bends in it and allow at least 100mm (4”) of clearance below the assembled filter for removal of the cartridge to service or replace. 3. Mark the required head position for fixing. 4. Grip the grey filter cap, twist to the ‘unlock’ position and pull down to disengage the filter cap from the head. 5. Fix the filter head to the unit or wall with the 3 screws provided. 6. Unscrew the filter body from the filter cap. 7. Open the filter and discard the protective bubble bag from the filter element. 8. Screw the threaded element mount stem into the grey cap until washer resistance is felt. Do not over-tighten. 9. Screw the white filter body into the grey filter cap until a positive stop is felt. Note that the inside of the filter cap is greased. Before screwing together ensure no dirt or particles are stuck to either the filter cap or filter body ‘O’ ring. 10. Align the arrows to the unlock position and push the assembled filter firmly into the head until it clicks into position. 11. Twist the white filter body until the locked position on the head is reached. Check that the arrows align to ensure that the filter is fully locked. Install the pipework: 1. The filter is supplied in either 3/8” or 1/4” push-fit versions to allow connection to your water supply and faucet using either 3/8” or 1/4” flexible, medium density polyethylene tubing. 2. A user valve/faucet should be installed in accordance with the manufacturer’s instructions in a convenient position and then connected downstream of the filter. For advice on the tubing and fittings required to connect your filter please contact a reputable dealer/agent. Connecting the Doulton® EcoFast® filter: 1. Turn off the cold water supply and connect the inlet tubing to the inlet port of the filter. 2. Connect the outlet tubing to the other side of the filter. 3. Check that the arrows on the ports of the head are pointing in the correct direction of flow and that the tubing is pushed into the fittings to a minimum of 18mm (0.75”) depth. Prepare the filter for use: 1. With the user faucet open, slowly turn on the mains water to allow the system to fill gradually and run the filtered water to waste for 10 minutes (or 15 litres). 2. Leave to stand for 24 hours to condition the ceramic filter element, then run water to waste for a further 10 minutes. 3. The filter is now ready for use.

  • How To Install...
    Follow our guide to discover how to install a Doulton® EcoFast...
  • How To Replace...
    Follow the steps in our guide to discover how to replace the E...

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!